Each burner is configured as a complete incense seal starter set. Add scent powder and a brass pattern mold in the next steps if needed.
Incense Seal Steps
01Add Incense AshPlace loose ash into the burner before leveling.
02Comb The AshUse brass tweezers to loosen and even the ash clockwise.
03Press The AshPress gently until the ash bed is smooth and level.
04Clean The BurnerSweep the rim while the ash surface stays flat.
05Place The MoldSet the brass seal mold at the center of the ash.
06Add PowderUse a small spoon to place scent powder into the mold.
07Fill The PatternTilt the incense scoop and fill the mold evenly.
08Lift The MoldLift straight up to leave a firm, clean powder pattern.
09Lead The IncenseTouch a lit incense stick to one edge of the trail.
Scent Powders
Each jar is 5g. Choose multiple scents for a fuller weekly rotation.
Prepared from raw material to quiet powder
Woods, florals, resins, and herbs are selected, rested, milled fine, then sun-dried so the powder brushes through the seal mold and burns in an even trail.
Natural woods, florals, resins, and herbs are chosen for balance.
Ingredients are sorted, rested, and conditioned before milling.
The blend is ground and sifted into a fine powder for clean release.
Low morning warmth settles moisture for an even incense trail.
Build the room note instead of using one flat scent
Use a steady wood powder as the base, then add pear, floral, herbal, or resin blends when the room needs a different mood. Multi-select powders make one burner feel calm, bright, or grounded across the week.